PYEX-EP-PG25 (M25 Cable Gland)

The M25 Plastic cable gland is made of fiberglass reinforced nylon for thermal endurance and mechanical strength.
IP67-grade silicon rubber packing enables the gland to maintain the highest performance in a variety of installations. Locking bolts also prevent loosening after installation.

PYEX-SG (Protective Grommet)

Silicone Grommet that protects against physical damage from sharp edges, pipe flanges and insulation cladding

• Minimum ambient temperature : -50°C
• Maximum exposure temperature: 215°C

PYEX-GT (Class Tape)

The attachment tape is used to fix the heating cable or temperature sensor. The glass tape is made of fiberglass for thermal endurance and mechanical strength

• Size : 12mm X 30M

PYEX-AT (Aluminum Tape)

The attachment tape is used to fix the heating cable or temperature sensor. The high performance tape is made of aluminum for thermal conductivity and mechanical strength.

• Size : 50mm X 50M

PYEX-CL-S/P (Warning Labels)

• S : PET sheet type warning label
• P : SUS316L Plate type warning label used for outdoor use.

PYEX-FS (Pipe Straps)

Metal straps for pipe mounting of enclosure connection kit

PYEX-PTK-M (Cold Applied Power Connection Kit)

The kit is certified for ATEX and IECEx for use in hazardous areas.
The silicone molded power tube does not require a heat gun or torch for insulating heating core.

• Minimum ambient temperature : -50°C
• Maximum exposure temperature : 150°C
• IP67

PYEX-PTK-S (Heat Shrink Power Connection Kit)

PTK-S is for power connecting FBL, FBH and FBX parallel heating cables to Ex certified enclosure

• Minimum ambient temperature : -50℃
• Maximum exposure temperature : 120℃
• IP66

PYEX-ETK-M (Cold Applied End Termination Kit)

This connection kit is designed for end terminating all SOLCO heating cables FBL and FBH parallel heating cable while maintaining electrical insulation of the heating cable conductors and core.

• Minimum ambient temperature : -50℃
• Maximum exposure temperature : 150℃
• IP67

PYEX-ETK-S (Heat Shrink End Termination Kit)

ETK-S is for power terminating FBL, FBH and FBX parallel heating cables to Ex certified enclosure.

• Minimum ambient temperature : -50℃
• Maximum exposure temperature : 120℃
• IP66

PYEX-SS-EK (Cold Applied End Connection Kit)

The PYEX-SS-EK is a low-profile end termination kit for FBL, FBH, FBX and FBZ parallel heat tracing cables. It is certified for ATEX and IECEx for use in hazardous areas. This kit does not require a heat gun or torch for the installation.

• Minimum ambient temperature : -50℃
• Maximum exposure temperature : 240℃
• SUS304
• IP66